SN74LV574APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 19.6 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.8pF |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV574APW Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 2V~5.5V is required for operation. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74LV series. It should not exceed 175MHzin terms of its output frequency. In total, it contains 1 elements. It consumes 20μA of quiescent It has been determined that there have been 20 terminations. The 74LV574 family contains this object. It is powered by a voltage of 2.5V . Input capacitance of this device is 1.8pF farads. LV/LV-A/LVX/His the family of this D flip flop. It is mounted by the way of Surface Mount. This board has 20 pins. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It offers maximum design flexibility with its output current of 16mA. It has 3lines. 8 channels are available.
SN74LV574APW Features
Tube package
74LV series
20 pins
8 Bits
SN74LV574APW Applications
There are a lot of Texas Instruments SN74LV574APW Flip Flops applications.
- Parallel data storage
- ESD protection
- Storage Registers
- Data transfer
- Computers
- ATE
- Instrumentation
- Storage registers
- Data storage
- QML qualified product
