SN74LV574AZQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 19.6 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.8pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV574AZQNR Overview
The flip flop is packaged in a case of 20-VFBGA. You can find it in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74LVseries comprises this type of FPGA. Its output frequency should not exceed 175MHz Hz. A total of 1 elements are present. T flip flop consumes 20μA quiescent energy. Currently, there are 20 terminations. It is a member of the 74LV574 family. A voltage of 2.5V is used as the power supply for this D latch. Its input capacitance is 1.8pF farads. The electronic device belongs to the LV/LV-A/LVX/Hfamily. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. There is a 5.5Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. Its superior flexibility is attributed to its use of 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. The flip flop has 2ports embedded within it. Its output current of 16mAallows for maximum design flexibility.
SN74LV574AZQNR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV574AZQNR Applications
There are a lot of Texas Instruments SN74LV574AZQNR Flip Flops applications.
- Matched Rise and Fall
- Asynchronous counter
- High Performance Logic for test systems
- Dynamic threshold performance
- EMI reduction circuitry
- Counters
- Automotive
- Single Up Count-Control Line
- Memory
- Computers
