SN74LVC1G374YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Weight | 1.700971mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G374YZPR Overview
The flip flop is packaged in 6-XFBGA, DSBGA. As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Tri-State. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 1.65V~5.5V is required for operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74LVCseries of FPGAs. It should not exceed 175MHzin its output frequency. As a result, it consumes 10μA quiescent current and is not affected by external forces. It has been determined that there have been 6 terminations. The object belongs to the 74LVC1G374 family. It is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic part mounted in the way of Surface Mount. This board is designed with 6pins on it. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 1. The maximal supply voltage (Vsup) reaches 5.5V. 1 circuits are used to achieve its superior flexibility. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. The flip flop contains 2ports.
SN74LVC1G374YZPR Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
SN74LVC1G374YZPR Applications
There are a lot of Texas Instruments SN74LVC1G374YZPR Flip Flops applications.
- Guaranteed simultaneous switching noise level
- ESCC
- Asynchronous counter
- Frequency Dividers
- Control circuits
- Frequency division
- Circuit Design
- Consumer
- Set-reset capability
- ESD performance
