SN74LVC1G74DCURG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 14.4 ns |
| Turn On Delay Time | 1.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Gates | 2 |
| Max Propagation Delay @ V, Max CL | 6.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G74DCURG4 Overview
The flip flop is packaged in 8-VFSOP (0.091, 2.30mm Width). The Tape & Reel (TR)package contains it. The output it is configured with uses Differential. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 1.65V~5.5V. A temperature of -40°C~125°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. JK flip flop belongs to the 74LVCseries of FPGAs. You should not exceed 200MHzin the output frequency of the device. There are 1 elements in it. As a result, it consumes 10μA quiescent current and is not affected by external forces. 8terminations have occurred. If you search by 74LVC1G74, you will find similar parts. A voltage of 1.8V provides power to the D latch. The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic component mounted in the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. It is designed with 1bits. The maximal supply voltage (Vsup) reaches 5.5V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The D latch runs on a voltage of 3.3V volts. The building block contains a total of 2 gates.
SN74LVC1G74DCURG4 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC1G74DCURG4 Applications
There are a lot of Texas Instruments SN74LVC1G74DCURG4 Flip Flops applications.
- CMOS Process
- Matched Rise and Fall
- Balanced Propagation Delays
- Convert a momentary switch to a toggle switch
- Buffered Clock
- QML qualified product
- Differential Individual
- Data transfer
- Automotive
- Count Modes
