SN74LVC1G74DQER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 4.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 4.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 400μm |
| Length | 1.4mm |
| Width | 1mm |
| Thickness | 370μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G74DQER Overview
As a result, it is packaged as 8-XFDFN. The package Cut Tape (CT)contains it. It is configured with Differentialas an output. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 1.65V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 200MHzin the output frequency of the device. A total of 8 terminations have been made. The 74LVC1G74 family contains it. It is powered by a voltage of 1.8V . A JK flip flop with a 5pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 1bits in its design. The maximal supply voltage (Vsup) reaches 5.5V. Despite its superior flexibility, it relies on 2 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TR. A power supply of 3.3Vis required to operate it. It is designed with 1 output lines. There is a consumption of 10μAof quiescent current from it.
SN74LVC1G74DQER Features
Cut Tape (CT) package
74LVC series
8 pins
1 Bits
3.3V power supplies
SN74LVC1G74DQER Applications
There are a lot of Texas Instruments SN74LVC1G74DQER Flip Flops applications.
- 2 – Bit synchronous counter
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
- Divide a clock signal by 2 or 4
- ESD performance
- Buffer registers
- Test & Measurement
- ESD protection
- Consumer
- Count Modes
