SN74LVC1G74RSE2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 5.301361mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 1.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Gates | 2 |
| Max Propagation Delay @ V, Max CL | 4.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 600μm |
| Length | 1.5mm |
| Width | 1.5mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G74RSE2 Overview
The flip flop is packaged in 8-UFQFN. D flip flop is embedded in the Cut Tape (CT) package. This output is configured with Differential. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. A 1.65V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. Its output frequency should not exceed 200MHz Hz. There is a consumption of 10μAof quiescent energy. There have been 8 terminations. It is a member of the 74LVC1G74 family. Power is supplied from a voltage of 1.8V volts. JK flip flop input capacitance is 5pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. This board is designed with 8pins on it. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part designed with 1bits is used in this application. As soon as 5.5Vis reached, Vsup reaches its maximum value. 1 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TR. There are 3.3V power supplies attached to it. 2 gates constitute its basic building block.
SN74LVC1G74RSE2 Features
Cut Tape (CT) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC1G74RSE2 Applications
There are a lot of Texas Instruments SN74LVC1G74RSE2 Flip Flops applications.
- Buffer registers
- Latch-up performance
- Differential Individual
- Clock pulse
- Memory
- Patented noise
- Functionally equivalent to the MC10/100EL29
- Data Synchronizers
- Supports Live Insertion
- Guaranteed simultaneous switching noise level
