SN74LVC1G79DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.9 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G79DBVR Overview
SC-74A, SOT-753is the way it is packaged. D flip flop is embedded in the Cut Tape (CT) package. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. Powered by a 1.65V~5.5Vvolt supply, it operates as follows. Temperature is set to -40°C~125°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 160MHz. It has been determined that there have been 5 terminations. It is a member of the 74LVC1G79 family. The power source is powered by 1.8V. Input capacitance of this device is 4pF farads. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 5. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. Flip flops designed with 1bits are used in this part. The superior flexibility of this product is achieved by using 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. An electrical current of 3.3V volts is applied to it. This T flip flop features a maximum design flexibility due to its output current of 32mA. This D latch consumes 10μA quiescent current at all.
SN74LVC1G79DBVR Features
Cut Tape (CT) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DBVR Applications
There are a lot of Texas Instruments SN74LVC1G79DBVR Flip Flops applications.
- ESD performance
- Supports Live Insertion
- Data transfer
- Control circuits
- Latch
- Frequency Divider circuits
- Computing
- Modulo – n – counter
- Automotive
- Pattern generators
