SN74LVC1G79DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G79DCKRG4 Overview
5-TSSOP, SC-70-5, SOT-353is the way it is packaged. It is included in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. A temperature of -40°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It belongs to the 74LVCseries of FPGAs. A frequency of 160MHzshould not be exceeded by its output. There is 10μA quiescent consumption. There are 5 terminations,D latch belongs to the 74LVC1G79 family. Power is provided by a 1.8V supply. The input capacitance of this JK flip flopis 4pF farads. LVC/LCX/Zis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 5. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 1. Its flexibility is enhanced by 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. It runs on 3.3Vvolts of power. As a result of its output current of 32mA, it is very flexible in terms of design.
SN74LVC1G79DCKRG4 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DCKRG4 Applications
There are a lot of Texas Instruments SN74LVC1G79DCKRG4 Flip Flops applications.
- Automotive
- Communications
- Matched Rise and Fall
- Registers
- Functionally equivalent to the MC10/100EL29
- CMOS Process
- Guaranteed simultaneous switching noise level
- Instrumentation
- Load Control
- Dynamic threshold performance
