SN74LVC1G80DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.9 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G80DBVR Overview
The flip flop is packaged in a case of SC-74A, SOT-753. A package named Cut Tape (CT)includes it. There is a Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 1.65V~5.5Vis required for its operation. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. A frequency of 160MHzshould not be exceeded by its output. It consumes 10μA of quiescent There have been 5 terminations. The 74LVC1G80 family contains this object. The power source is powered by 1.8V. JK flip flop input capacitance is 3.5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. It is designed with 5 pins. There is a clock edge trigger type of Positive Edgeon this device. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 1bits. 1 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TR. The system runs on a power supply of 3.3V watts. The 32mA output current allows it to be designed with the greatest amount of flexibility.
SN74LVC1G80DBVR Features
Cut Tape (CT) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G80DBVR Applications
There are a lot of Texas Instruments SN74LVC1G80DBVR Flip Flops applications.
- ESCC
- Parallel data storage
- Storage registers
- Buffered Clock
- Balanced Propagation Delays
- 2 – Bit synchronous counter
- Frequency Divider circuits
- Reduced system switching noise
- Asynchronous counter
- Functionally equivalent to the MC10/100EL29
