SN74LVC1G80DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G80DCKR Overview
As a result, it is packaged as 5-TSSOP, SC-70-5, SOT-353. There is an embedded version in the package Cut Tape (CT). In the configuration, Invertedis used as the output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. In order for it to function properly, its output frequency should not exceed 160MHz. T flip flop consumes 10μA quiescent energy. The number of terminations is 5. It is a member of the 74LVC1G80 family. The power supply voltage is 1.8V. A JK flip flop with a 3.5pFfarad input capacitance is used here. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. With its 5pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part designed with 1bits is used in this application. On the basis of its reliable performance, this D flip flop is well suited for use with TR. A total of 3.3V power supplies are needed to run it. The 32mA output current allows it to be designed with the greatest amount of flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1 channels are available.
SN74LVC1G80DCKR Features
Cut Tape (CT) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G80DCKR Applications
There are a lot of Texas Instruments SN74LVC1G80DCKR Flip Flops applications.
- Single Up Count-Control Line
- Differential Individual
- ESD protection
- Circuit Design
- Event Detectors
- QML qualified product
- Buffer registers
- Data storage
- Computers
- Automotive
