SN74LVC1G80DCKT
| Parameters | |
|---|---|
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
SN74LVC1G80DCKT Overview
It is packaged in the way of 5-TSSOP, SC-70-5, SOT-353. It is contained within the Tape & Reel (TR)package. T flip flop uses Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LVC series. A frequency of 160MHzshould not be exceeded by its output. It has been determined that there have been 5 terminations. The 74LVC1G80 family contains it. An input voltage of 1.8Vpowers the D latch. The input capacitance of this JK flip flopis 3.5pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with 5 pins. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Using 1 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 3.3V volts is applied to it. In addition to its maximum design flexibility, the output current of the T flip flop is 32mA. This D latch consumes 10μA quiescent current at all.
SN74LVC1G80DCKT Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G80DCKT Applications
There are a lot of Texas Instruments SN74LVC1G80DCKT Flip Flops applications.
- Single Down Count-Control Line
- Data storage
- Shift registers
- Safety Clamp
- QML qualified product
- Memory
- Divide a clock signal by 2 or 4
- Common Clocks
- CMOS Process
- Instrumentation
