SN74LVC2G74MDCUTEP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 8.2 ns |
| Turn On Delay Time | 4.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 6.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC2G74MDCUTEP Overview
The item is packaged in 8-VFSOP (0.091, 2.30mm Width)cases. You can find it in the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. It is operating at -55°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74LVCseries of FPGAs. It should not exceed 200MHzin its output frequency. During its operation, it consumes 10μA quiescent energy. A total of 8 terminations have been made. Members of the 74LVC2G74family make up this object. A voltage of 3.3V is used to power it. Input capacitance of this device is 5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted in the way of Surface Mount. There are 8pins on it. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. 1bits are used in its design. The maximal supply voltage (Vsup) reaches 5.5V. The superior flexibility is achieved through the use of 1 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A power supply of 3.3Vis required to operate it.
SN74LVC2G74MDCUTEP Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
SN74LVC2G74MDCUTEP Applications
There are a lot of Texas Instruments SN74LVC2G74MDCUTEP Flip Flops applications.
- Individual Asynchronous Resets
- Differential Individual
- Buffer registers
- Instrumentation
- Storage Registers
- Control circuits
- Bounce elimination switch
- Shift Registers
- Convert a momentary switch to a toggle switch
- Frequency Dividers
