SN74LVC2G79YZPR
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.005mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Weight | 2.296311mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
SN74LVC2G79YZPR Overview
It is packaged in the way of 8-XFBGA, DSBGA. The Cut Tape (CT)package contains it. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 1.65V~5.5V is required for operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 160MHzin its output frequency. There is 5μA quiescent consumption. There have been 8 terminations. This D latch belongs to the family of 74LVC2G79. Power is provided by a 1.8V supply. Its input capacitance is 3.5pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. There are 8pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. To achieve this superior flexibility, 2 circuits are used. This D flip flop is well suited for TR based on its reliable performance. An electrical current of 3.3V volts is applied to it. It has 1 output lines to operate.
SN74LVC2G79YZPR Features
Cut Tape (CT) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G79YZPR Applications
There are a lot of Texas Instruments SN74LVC2G79YZPR Flip Flops applications.
- QML qualified product
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Consumer
- Count Modes
- Buffered Clock
- Individual Asynchronous Resets
- EMI reduction circuitry
- Computers
- Storage registers
