SN74LVC2G80DCURG4
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G80 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Inverted |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.005mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
SN74LVC2G80DCURG4 Overview
The flip flop is packaged in a case of 8-VFSOP (0.091, 2.30mm Width). The package Tape & Reel (TR)contains it. The output it is configured with uses Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 1.65V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. D-Typedescribes this flip flop. The FPGA belongs to the 74LVC series. This D flip flop should not have a frequency greater than 160MHz. As a result, it consumes 5μA quiescent current. A total of 8terminations have been recorded. It is a member of the 74LVC2G80 family. A voltage of 1.8V is used as the power supply for this D latch. Input capacitance of this device is 3.5pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. This board has 8 pins. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. 2 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TR. The power supply is 3.3V. There are 1 output lines on it.
SN74LVC2G80DCURG4 Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G80DCURG4 Applications
There are a lot of Texas Instruments SN74LVC2G80DCURG4 Flip Flops applications.
- Safety Clamp
- Bus hold
- Pattern generators
- 2 – Bit synchronous counter
- QML qualified product
- Shift Registers
- Clock pulse
- Patented noise
- Data transfer
- Dynamic threshold performance
