SN74LVC32374AZKER
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 166.610147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC32374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 850μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC32374AZKER Overview
The package is in the form of 96-LFBGA. D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. Its output frequency should not exceed 150MHz. A total of 4 elements are present. As a result, it consumes 40μA quiescent current. There are 96 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC32374 family. Power is supplied from a voltage of 1.8V volts. A 5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family LVC/LCX/Zcan be found here. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 96. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. There are 32bits in its design. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be maintained above 1.65V for normal operation. As a result of its reliability, this D flip flop is ideally suited for TR. The system runs on a power supply of 3.3V watts. The flip flop has 2ports embedded within it. In order to operate, the chip has 8 output lines.
SN74LVC32374AZKER Features
Tape & Reel (TR) package
74LVC series
96 pins
32 Bits
3.3V power supplies
SN74LVC32374AZKER Applications
There are a lot of Texas Instruments SN74LVC32374AZKER Flip Flops applications.
- Latch
- Balanced 24 mA output drivers
- High Performance Logic for test systems
- Single Down Count-Control Line
- Cold spare funcion
- Load Control
- Single Up Count-Control Line
- Convert a momentary switch to a toggle switch
- Safety Clamp
- Memory
