SN74LVC373AQDWRQ1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC373AQDWRQ1 Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). The package is in the form of Tape & Reel (TR). The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A voltage of 1.65V~3.6V is used as the supply voltage for this device. There is -40°C~125°C operating temperature. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74LVC series. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. As a member of the 74LVC373 family, it falls under that category. In order to function, the supply voltage should be set to 2.7V. The device is equipped with 20 pins. It is a member of the LVC/LCX/Z family of electronic devices. 20 pins are used in its design. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. Vsup reaches 3.6V as the maximum supply voltage. The device is powered by 3.3V power supplies. It is recommended to have a higher supply voltage (Vsup) than 2V. The reliability of this device makes it well suited to TAPE AND REEL. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. 1 elements are present in it.
SN74LVC373AQDWRQ1 Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LVC373AQDWRQ1 Applications
There are a lot of Texas Instruments SN74LVC373AQDWRQ1 Latches applications.
- Shift left register
- Control circuits
- Data acquisition
- Parallel data synchronization
- Pseudo-random code generators
- TV Set-top Boxes
- Programmable binary
- BCD counting
- Serial Output Data Queuing
- Flip-flops
