SN74LVC374ARGYRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 7 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC374ARGYRG4 Overview
In the form of VQFN, it has been packaged. Package Tape & Reel (TR)embeds it. 20terminations have occurred. Power is supplied from a voltage of 1.8V volts. It is a member of the LVC/LCX/Zfamily of D flip flop. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. Its flexibility is enhanced by 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop is embedded with 2ports. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As of now, there are 1input lines. A -24mAis set for the high level output current. It is set to 24mAfor low level output current. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be higher than -40°C. A minimum supply voltage of 1.65V is required for these RS flip flops to operate. It is capable of supporting a maximum supply voltage of 3.6V. It is possible to achieve a frequency of 100MHz. This logic IC is BUS DRIVER. It has 1 functions. It is equipped with 20 pin count. Its output current of 24mA allows for maximum design flexibility.
SN74LVC374ARGYRG4 Features
Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count
SN74LVC374ARGYRG4 Applications
There are a lot of Texas Instruments SN74LVC374ARGYRG4 Flip Flops applications.
- Frequency Dividers
- QML qualified product
- Asynchronous counter
- ESD protection
- Storage Registers
- Single Down Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Dynamic threshold performance
- Buffer registers
