SN74LVC574ADW
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
SN74LVC574ADW Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. Tri-State, Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. -40°C~125°C TAis the operating temperature. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74LVC series. You should not exceed 150MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 10μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC574family includes it. The D flip flop is powered by a voltage of 1.8V . Its input capacitance is 4pF farads. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a Bus Driver/Transceiverbase part number assigned to the RS flip flops. 8bits are used in its design. Using 8 circuits, it is highly flexible. The flip flop has 2ports embedded within it. This T flip flop features a maximum design flexibility due to its output current of 24mA. As of now, there are 3input lines.
SN74LVC574ADW Features
Tube package
74LVC series
20 pins
8 Bits
SN74LVC574ADW Applications
There are a lot of Texas Instruments SN74LVC574ADW Flip Flops applications.
- Consumer
- Memory
- Modulo – n – counter
- Frequency Dividers
- Buffer registers
- Divide a clock signal by 2 or 4
- Common Clocks
- Convert a momentary switch to a toggle switch
- Data storage
- Single Down Count-Control Line
