SN74LVC574ARGYRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 800μm |
| Length | 4.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC574ARGYRG4 Overview
VQFNis the packaging method. D latch consists of 1 elements. Currently, there are 20 terminations. The power supply voltage is 1.8V. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. The electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. Due to its superior flexibility, it uses 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A D flip flop with 2embedded ports is available. It is designed with 3 output lines. As of now, there are 2input lines. It is set to -24mAfor the high level output current. It is set to 24mAfor the low level output current. It is recommended that the operating temperature be below 125°C. If the operating temperature is higher than -40°C, the system should operate properly. Normally, it operates with a voltage of 1.65VV as its minimum supply voltage. It supports a maximum supply voltage of 3.6V volts. This can be achieved at a frequency of 150MHz. It uses BUS DRIVERas its logic IC. As a result, it is equipped with 1 functions . 20pins are provided on the D latch. 24mA provides maximum design flexibility due to its output current.
SN74LVC574ARGYRG4 Features
20 pins
8 Bits
1 Functions
20 pin count
SN74LVC574ARGYRG4 Applications
There are a lot of Texas Instruments SN74LVC574ARGYRG4 Flip Flops applications.
- Power down protection
- Reduced system switching noise
- Dynamic threshold performance
- High Performance Logic for test systems
- Control circuits
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Buffer registers
- Digital electronics systems
