SN74LVC74ANSR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
SN74LVC74ANSR Overview
14-SOIC (0.209, 5.30mm Width)is the way it is packaged. D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Differential. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis required for its operation. Temperature is set to -40°C~125°C TA. This D latch has the type D-Type. The FPGA belongs to the 74LVC series. A frequency of 100MHzshould be the maximum output frequency. There is 10μA quiescent consumption. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74LVC74. Power is provided by a 1.8V supply. A 5pFfarad input capacitance is provided by this T flip flop. LVC/LCX/Zis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. Vsup reaches 3.6V, the maximal supply voltage. Its flexibility is enhanced by 2 circuits. Due to its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 3.3V watts. Featuring the maximum design flexibility, it has an output current of 24mA . There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74LVC74ANSR Features
Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74ANSR Applications
There are a lot of Texas Instruments SN74LVC74ANSR Flip Flops applications.
- CMOS Process
- Bus hold
- High Performance Logic for test systems
- Automotive
- Functionally equivalent to the MC10/100EL29
- Latch
- Latch-up performance
- Data storage
- Frequency Divider circuits
- Asynchronous counter
