SN74LVC821APWT
| Parameters | |
|---|---|
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 7.3ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
SN74LVC821APWT Overview
It is packaged in the way of 24-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74LVCseries comprises this type of FPGA. There should be no greater frequency than 150MHzon its output. A total of 1elements are contained within it. Despite external influences, it consumes 10μAof quiescent current. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC821 family contains this object. The D flip flop is powered by a voltage of 1.8V . JK flip flop input capacitance is 5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. Electronic part Surface Mountis mounted in the way. This board has 24 pins. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. The superior flexibility is achieved through the use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. This D flip flop is equipped with 0 ports. Featuring the maximum design flexibility, it has an output current of 24mA . In order for the chip to function, it has 3output lines.
SN74LVC821APWT Features
Tape & Reel (TR) package
74LVC series
24 pins
SN74LVC821APWT Applications
There are a lot of Texas Instruments SN74LVC821APWT Flip Flops applications.
- Single Up Count-Control Line
- Computing
- CMOS Process
- Memory
- ATE
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- ESCC
- Power down protection
- Control circuits
