SN74LVCH16374AZQLR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16374AZQLR Overview
It is embeded in 56-VFBGA case. A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVCH series. This D flip flop should not have a frequency greater than 150MHz. In total, it contains 2 elements. As a result, it consumes 20μA quiescent current. There are 56 terminations,Members of the 74LVCH16374family make up this object. The D flip flop is powered by a voltage of 1.8V . Its input capacitance is 5pFfarads. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. It is mounted by the way of Surface Mount. This board is designed with 56pins on it. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. It is designed with 16bits. Normally, the supply voltage (Vsup) should be above 1.65V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The flip flop has 2embedded ports. With an output current of 24mA, this device offers maximum design flexibility. To operate, the chip has a total of 3 output lines. A total of 8input lines have been provided.
SN74LVCH16374AZQLR Features
Tape & Reel (TR) package
74LVCH series
56 pins
16 Bits
SN74LVCH16374AZQLR Applications
There are a lot of Texas Instruments SN74LVCH16374AZQLR Flip Flops applications.
- Clock pulse
- Shift Registers
- Event Detectors
- Individual Asynchronous Resets
- QML qualified product
- Single Down Count-Control Line
- Differential Individual
- Dynamic threshold performance
- Frequency division
- ESD protection
