SN74LVTH162374DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVTH162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 30mA |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH162374DGGR Overview
It is embeded in 48-TFSOP (0.240, 6.10mm Width) case. There is an embedded version in the package Cut Tape (CT). T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 2.7V~3.6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74LVTHseries contain this type of chip. A frequency of 160MHzshould be the maximum output frequency. A total of 2elements are present in it. It consumes 190μA of quiescent A total of 48terminations have been recorded. Members of the 74LVTH162374family make up this object. The power source is powered by 3.3V. The input capacitance of this JK flip flopis 3pF farads. It is a member of the LVTfamily of D flip flop. Electronic part Surface Mountis mounted in the way. This board is designed with 48pins on it. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with 16bits. Due to its reliability, this T flip flop is well suited for TR. This flip flop has a total of 2ports. The supply voltage should be maintained at 3.3V for high efficiency. It offers maximum design flexibility with its output current of 30mA. There are no output lines on the JK flip flop. This input has 1lines in it. It consumes a total of 5mA quiescent current at any given time.
SN74LVTH162374DGGR Features
Cut Tape (CT) package
74LVTH series
48 pins
16 Bits
SN74LVTH162374DGGR Applications
There are a lot of Texas Instruments SN74LVTH162374DGGR Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Frequency division
- Registers
- Modulo – n – counter
- Buffer registers
- Data transfer
- Buffered Clock
- Asynchronous counter
- Frequency Divider circuits
- ESD protection
