SN74LVTH273DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 3.2 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 5mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH273DW Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. It is contained within the Tubepackage. T flip flop uses Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74LVTHseries FPGA. A frequency of 150MHzshould be the maximum output frequency. A total of 1elements are contained within it. Despite external influences, it consumes 190μAof quiescent current. Terminations are 20. The object belongs to the 74LVTH273 family. The power supply voltage is 3.3V. Input capacitance of this device is 4pF farads. Electronic devices of this type belong to the LVTfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 2.7V for normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. For high efficiency, the supply voltage should be kept at 3.3V. With a current output of 64mA , it offers maximum design flexibility.
SN74LVTH273DW Features
Tube package
74LVTH series
20 pins
8 Bits
SN74LVTH273DW Applications
There are a lot of Texas Instruments SN74LVTH273DW Flip Flops applications.
- Power down protection
- Shift Registers
- Counters
- Event Detectors
- Buffered Clock
- Reduced system switching noise
- Instrumentation
- Computers
- ESCC
- Test & Measurement
