SN74LVTH273MNSREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 3.2 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH273MNSREP Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Non-Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 2.7V~3.6V. A temperature of -55°C~125°C TAis used in the operation. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74LVTH series. You should not exceed 150MHzin its output frequency. A total of 1elements are contained within it. It consumes 190μA of quiescent There have been 20 terminations. It is a member of the 74LVTH273 family. The power source is powered by 3.3V. The input capacitance of this JK flip flopis 4pF farads. It is a member of the LVTfamily of D flip flop. It is mounted by the way of Surface Mount. This board has 20 pins. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 8 Bits. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 2.7Vin order to ensure normal operation. Considering the reliability of this T flip flop, it is well suited for TR. In order to ensure high efficiency, the supply voltage should remain at 3.3V. Its output current of 64mAallows for maximum design flexibility. 8input lines are available for you to choose from.
SN74LVTH273MNSREP Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
SN74LVTH273MNSREP Applications
There are a lot of Texas Instruments SN74LVTH273MNSREP Flip Flops applications.
- Computing
- Count Modes
- Set-reset capability
- Individual Asynchronous Resets
- Reduced system switching noise
- Patented noise
- Power down protection
- Shift registers
- Single Down Count-Control Line
- Frequency division
