SN74LVTH273PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 3.2 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 5mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH273PW Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tubepackage contains it. There is a Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 2.7V~3.6V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74LVTH series. It should not exceed 150MHzin its output frequency. The list contains 1 elements. There is 190μA quiescent consumption. 20terminations have occurred. The object belongs to the 74LVTH273 family. A voltage of 3.3V is used to power it. Input capacitance of this device is 4pF farads. A device of this type belongs to the family of LVT. There is an electronic component mounted in the way of Surface Mount. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. In this case, the maximum supply voltage (Vsup) reaches 3.6V. A normal operating voltage (Vsup) should remain above 2.7V. The superior flexibility of this product is achieved by using 8 circuits. If high efficiency is desired, the supply voltage should be kept at 3.3V. With an output current of 64mA, this device offers maximum design flexibility.
SN74LVTH273PW Features
Tube package
74LVTH series
20 pins
8 Bits
SN74LVTH273PW Applications
There are a lot of Texas Instruments SN74LVTH273PW Flip Flops applications.
- Single Down Count-Control Line
- Frequency division
- Set-reset capability
- Control circuits
- Memory
- Dynamic threshold performance
- Frequency Divider circuits
- ESD protection
- Balanced 24 mA output drivers
- Bounce elimination switch
