SN74S74DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74S74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Output Current | 20mA |
| Number of Bits | 1 |
| Clock Frequency | 110MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6 ns |
| Family | S |
| Logic Function | AND |
| Current - Quiescent (Iq) | 25mA |
| Current - Output High, Low | 1mA 20mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74S74DRG4 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tape & Reel (TR)package. T flip flop uses Differentialas the output. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. It is operating at 0°C~70°C TA. A flip flop of this type is classified as a D-Type. The 74Sseries comprises this type of FPGA. A frequency of 110MHzshould not be exceeded by its output. A total of 2elements are present in it. As a result, it consumes 25mA quiescent current and is not affected by external forces. 14terminations have occurred. JK flip flop belongs to 74S74 family. The power source is powered by 5V. It is a member of the Sfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. 14pins are included in its design. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. There are 1bits in its design. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.75V. It runs on 5Vvolts of power. With a current output of 20mA , it offers maximum design flexibility. It is designed with 1 output lines.
SN74S74DRG4 Features
Tape & Reel (TR) package
74S series
14 pins
1 Bits
5V power supplies
SN74S74DRG4 Applications
There are a lot of Texas Instruments SN74S74DRG4 Flip Flops applications.
- Event Detectors
- CMOS Process
- Pattern generators
- Communications
- Set-reset capability
- Buffer registers
- Frequency Divider circuits
- Supports Live Insertion
- Single Down Count-Control Line
- Counters
