SS441A-T3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | TO-262-3 Short Leads, I2Pak |
| Supplier Device Package | Radial Lead |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | SS400 |
| Feature | Temperature Compensated |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Integrated Circuit (IC) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | Hall Effect |
| Voltage - Supply | 3.8V~30V |
| Function | Unipolar Switch |
| Current - Supply (Max) | 10mA |
| Output Type | Open Collector |
| Max Output Current | 20mA |
| Operating Supply Voltage | 12V |
| Leakage Current | 10μA |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.8V |
| Operating Supply Current | 10mA |
| Polarization | South Pole |
| Current - Output (Max) | 20mA |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Test Condition | 25°C |
| Sensing Range | 11.5mT Trip, 2mT Release |
| RoHS Status | RoHS Compliant |
SS441A-T3 Overview
The magnetic switch is packaged in the Tape & Reel (TR) to prevent damage. For safety reasons, the magnetic switches are packaged in TO-262-3 Short Leads, I2Pak packages. The magnetic switches are capable of supplying 10mA as their maximum current. When these switches are working, 20mA is the maximum current they can output. For magnetic switches to be actuated, the maximum current should be 20mA. The switches should normally output 20mA current. The magnetic switches can operate at 150°C. The magnet switch should work, however, if the operating temperature is greater than -40°C. As the magnetic switches function, they could supply a voltage of 12V. In this electronic component, 30V is the maximum voltage that can be supplied. Depending on the switch, 3.8V may be supplied as a minimum voltage. It is capable of producing 10mA current when it is working.
SS441A-T3 Features
Packaging: Tape & Reel (TR)
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 3.8V~30V
Operating Temperature: -40°C~150°C TA
Mounting Type: Through Hole
Output Type: Open Collector
Maximum Supply Current: 10mA
SS441A-T3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SS441A-T3 Magnetic Switches applications.
- Reed switch replacement
- Discrimination of ferromagnetic
- Industrial process control
- Counter pickup
- Position and limit sensing
- Motor assemblies
- Dyno testing
- Monitor protections of the safety gates
- Commutation of brushless DC motors
- Spindles
