SSM2315CBZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, WLCSP |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2315 |
| Pin Count | 9 |
| Efficiency | 93 % |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Operating Supply Current | 2.8mA |
| Nominal Supply Current | 3.3mA |
| Output Power | 4.28W |
| Common Mode Rejection Ratio | 55 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 6dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Gain | 6 dB |
| Max Output Power | 4.28W |
| Signal to Noise Ratio (SNR) | 103 dB |
| Max Output Power x Channels @ Load | 4.28W x 1 @ 3 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 3Ohm |
| Height Seated (Max) | 0.655mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SSM2315CBZ-REEL7 Overview
In 9-WFBGA, WLCSP is embedded this device.Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 9 termination.Output 1-Channel (Mono) is configured for this device.In terms of electrical devices, it belongs to the type Class D .The computer or other communication device has 9 pins, which are pronged contacts.The electronic part is positioned in the way of Surface Mount .This electrical device operates at 2.5V~5.5V volts.This device is equipped with a total of 1 channels.Amp parts is possible to operate wAmp partsh Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .Temperatures should not exceed -40°C~85°C TA .The device is equipped with 9 pins.This chip belongs to Audio/Video Amplifiers .Amp parts is included in the SSM2315 family.The chip should be mounted in the way of Surface Mount .A maximum output power of 4.28W kWh per hour can be achieved with this electronic part.Amp parts is important to keep the supply voltage (Vsup) above 2.5V so that the device functions normally.Upon reaching 5.5V , the maximum supply voltage (Vsup) is reached.In this electronic part, the supply type is Single .The system is powered by a 5V battery.
SSM2315CBZ-REEL7 Features
9-WFBGA, WLCSP package
9 pin count
SSM2315 family
4.28W kWh per hour
SSM2315CBZ-REEL7 Applications
There are a lot of Analog Devices Inc. SSM2315CBZ-REEL7 audio amplifiers applications.
- Television broadcasting equipment
- Signal amplification
- Portable electronic products powered by batteries
- Broadcasting
- Semiconductor detectors
- Band-pass filter
- Weak signal detection
- Radar
- Communication
- Inverse/same-phase proportional circuit
