SY100EL29VZG-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EL |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | -3V~-5.5V |
| Frequency | 1.1GHz |
| Base Part Number | 100EL29 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | -5.5V |
| Min Supply Voltage | -3V |
| Number of Bits | 2 |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 720 ps |
| Quiescent Current | 50mA |
| Turn On Delay Time | 500 ps |
| Logic Function | AND |
| Current - Quiescent (Iq) | 50mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SY100EL29VZG-TR Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Differentialas its output configuration. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A voltage of -3V~-5.5Vis required for its operation. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 100ELseries of FPGAs. In order for it to function properly, its output frequency should not exceed 1.1GHz. In total, there are 2 elements. There is 50mA quiescent consumption. The 100EL29 family contains this object. There is an electronic part mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. The flip flop is designed with 2bits. Due to its superior flexibility, it uses 2 circuits. There are 1 output lines on it. As of now, there are 1input lines. In terms of quiescent current, it consumes 50mA . A high level output current of -50mAis set. There is 50mA output current at the low level. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature is higher than -40°C. The minimum voltage required for operation is -3V. There is a maximum supply voltage of -5.5V. It is possible to achieve a frequency of 1.1GHz.
SY100EL29VZG-TR Features
Tape & Reel (TR) package
100EL series
20 pins
2 Bits
SY100EL29VZG-TR Applications
There are a lot of Microchip Technology SY100EL29VZG-TR Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Shift registers
- QML qualified product
- Cold spare funcion
- Frequency Divider circuits
- High Performance Logic for test systems
- Patented noise
- CMOS Process
- Latch
- Automotive
