SY10EL35ZG
| Parameters | |
|---|---|
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EL |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | -4.75V~-5.5V |
| Frequency | 2.2GHz |
| Base Part Number | 10EL35 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | -5.5V |
| Min Supply Voltage | -4.75V |
| Number of Bits | 1 |
| Clock Frequency | 2.2GHz |
| Propagation Delay | 745 ps |
| Quiescent Current | 32mA |
| Current - Quiescent (Iq) | 32mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
SY10EL35ZG Overview
In the form of 8-SOIC (0.154, 3.90mm Width), it has been packaged. A package named Tubeincludes it. There is a Differentialoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A -4.75V~-5.5Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 10ELseries FPGA. Its output frequency should not exceed 2.2GHz. In total, it contains 1 elements. There is a consumption of 32mAof quiescent energy. The 10EL35family includes it. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. Its clock edge trigger type is Positive Edge. The flip flop is designed with 1bits. In terms of quiescent current, it consumes 32mA . It is recommended that the operating temperature be below 85°C. Temperatures above -40°Cshould be used. In order for it to operate, a supply voltage of -4.75Vis required. There is a maximum voltage support of -5.5V. 2.2GHzis the maximum frequency that can be achieved.
SY10EL35ZG Features
Tube package
10EL series
8 pins
1 Bits
SY10EL35ZG Applications
There are a lot of Microchip Technology SY10EL35ZG Flip Flops applications.
- Asynchronous counter
- Latch
- Single Up Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Bus hold
- Frequency Divider circuits
- Computers
- Matched Rise and Fall
- Patented noise
- Supports Live Insertion
