SY10EP31VKG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 10EP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | -3V~-5.5V |
| Frequency | 3GHz |
| Base Part Number | 10EP31 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.97V |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 500 ps |
| Quiescent Current | 45mA |
| Turn On Delay Time | 500 ps |
| Logic Function | AND |
| Current - Quiescent (Iq) | 45mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SY10EP31VKG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the way it is packaged. A package named Tubeincludes it. Currently, the output is configured to use Differential. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a -3V~-5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 10EPseries of FPGAs. A frequency of 3GHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 45mA quiescent current and is not affected by external forces. The object belongs to the 10EP31 family. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. Its clock edge trigger type is Positive Edge. This flip flop is designed with 1 Bits. Its flexibility is enhanced by 1 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. In order to operate, the chip has 1 output lines. As of now, there are 1input lines. In terms of quiescent current, it consumes 45mA . In this case, the high level output current is set to -50mA. Low level output current is set to 50mA. If the operating temperature is lower than 85°C, it is recommended. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 2.97V as the minimum supply voltage. The maximum supply voltage supported by the flip flop is 5.5V. This can be achieved at a frequency of 3GHz.
SY10EP31VKG Features
Tube package
10EP series
8 pins
1 Bits
SY10EP31VKG Applications
There are a lot of Microchip Technology SY10EP31VKG Flip Flops applications.
- Data storage
- Frequency division
- Cold spare funcion
- Patented noise
- Data transfer
- Safety Clamp
- Control circuits
- Automotive
- Instrumentation
- Memory
