TC74HC574APF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | TC74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC574 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 59MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 240 ns |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height Seated (Max) | 4.45mm |
| Length | 24.6mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
TC74HC574APF Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. A package named Tubeincludes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Through Holeis positioned in the way of this electronic part. Powered by a 2V~6Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the TC74HCseries of FPGAs. There should be no greater frequency than 59MHzon its output. A total of 1elements are present in it. As a result, it consumes 4μA quiescent current. The number of terminations is 20. The object belongs to the 74HC574 family. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 5pF farads. Electronic devices of this type belong to the HC/UHfamily. The part you are looking for is included in FF/Latches. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The D latch runs on a voltage of 2/6V volts. A D flip flop with 2embedded ports is available.
TC74HC574APF Features
Tube package
TC74HC series
2/6V power supplies
TC74HC574APF Applications
There are a lot of Toshiba Semiconductor and Storage TC74HC574APF Flip Flops applications.
- Counters
- Supports Live Insertion
- Buffered Clock
- Clock pulse
- Cold spare funcion
- Registers
- Circuit Design
- Event Detectors
- ESD performance
- Balanced Propagation Delays
