TC74LCX374FTELM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1998 |
| Series | 74LCX |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~3.6V |
| Frequency | 150MHz |
| Base Part Number | 74LCX374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | 24mA |
| Input Capacitance | 7pF |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74LCX374FTELM Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. As part of the package Cut Tape (CT), it is embedded. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. JK flip flop is a part of the 74LCXseries of FPGAs. It should not exceed 150MHzin its output frequency. A total of 1 elements are present. As a result, it consumes 10μA quiescent current. The 74LCX374family includes it. Its input capacitance is 7pFfarads. It is mounted in the way of Surface Mount. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. This D latch consumes 10μA quiescent current at all. High level output current is set to 24mA. Low level output current is set to 24mA. There should be a temperature below 85°Cduring operation. Temperatures above -40°Cshould be used. It is possible to achieve a frequency of 150MHz.
TC74LCX374FTELM Features
Cut Tape (CT) package
74LCX series
20 pins
8 Bits
TC74LCX374FTELM Applications
There are a lot of Toshiba Semiconductor and Storage TC74LCX374FTELM Flip Flops applications.
- ATE
- Digital electronics systems
- Supports Live Insertion
- Pattern generators
- Shift Registers
- Buffered Clock
- Memory
- ESD protection
- Modulo – n – counter
- Power down protection
