TC74VHC574FTELM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | TC74VHC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~5.5V |
| Frequency | 115MHz |
| Base Part Number | 74VHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 10.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7.1 ns |
| Logic Function | D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | 8mA |
| Input Capacitance | 4pF |
| Low Level Output Current | 8mA |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74VHC574FTELM Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The TC74VHCseries comprises this type of FPGA. Its output frequency should not exceed 115MHz Hz. In total, there are 1 elements. T flip flop consumes 40μA quiescent energy. The 74VHC574family includes it. A JK flip flop with a 4pFfarad input capacitance is used here. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. There are 8bits in this flip flop. It consumes a total of 4μA quiescent current at any given time. In this case, the high level output current is set to 8mA. The low level output current is set to 8mA. A temperature below 85°Cshould be used for operation. Operating temperatures should be above -40°C. 115MHzis the maximum frequency that can be achieved.
TC74VHC574FTELM Features
Tape & Reel (TR) package
TC74VHC series
20 pins
8 Bits
TC74VHC574FTELM Applications
There are a lot of Toshiba Semiconductor and Storage TC74VHC574FTELM Flip Flops applications.
- Single Up Count-Control Line
- Memory
- Latch-up performance
- Test & Measurement
- ATE
- EMI reduction circuitry
- Set-reset capability
- Frequency Divider circuits
- ESD protection
- Frequency Dividers
