TC74VHCT374AFTEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | TC74VHCT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74VHCT374AFTEL Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. It belongs to the TC74VHCTseries of FPGAs. It should not exceed 130MHzin terms of its output frequency. There are 1 elements in it. Terminations are 20. It is a member of the 74VHCT374 family. A voltage of 5V provides power to the D latch. There is 4pF input capacitance for this T flip flop. An electronic device belonging to the family AHCT/VHCTcan be found here. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The power supply is 5V. The flip flop has 2embedded ports. High efficiency requires the supply voltage to be maintained at 5V. In terms of quiescent current, it consumes 4μA .
TC74VHCT374AFTEL Features
Tape & Reel (TR) package
TC74VHCT series
20 pins
5V power supplies
TC74VHCT374AFTEL Applications
There are a lot of Toshiba Semiconductor and Storage TC74VHCT374AFTEL Flip Flops applications.
- ATE
- Communications
- Event Detectors
- Frequency division
- Supports Live Insertion
- Bounce elimination switch
- Data storage
- Balanced Propagation Delays
- Latch-up performance
- Registers
