banner_page

TC7WZ74FK,LJ(CT

1.65V~5.5V 200MHz 1 Bit D-Type Flip Flop DUAL 10μA TC7WZ Series 8-VFSOP (0.091, 2.30mm Width)


  • Manufacturer: Toshiba Semiconductor and Storage
  • Nocochips NO: 830-TC7WZ74FK,LJ(CT
  • Package: 8-VFSOP (0.091, 2.30mm Width)
  • Datasheet: PDF
  • Stock: 316
  • Description: 1.65V~5.5V 200MHz 1 Bit D-Type Flip Flop DUAL 10μA TC7WZ Series 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-VFSOP (0.091, 2.30mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
Series TC7WZ
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type D-Type
Technology CMOS
Voltage - Supply 1.65V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code R-PDSO-G8
Function Set(Preset) and Reset
Output Type Push-Pull
Number of Elements 1
Supply Voltage-Max (Vsup) 5.5V
Number of Bits 1
Clock Frequency 200MHz
Family LVC/LCX/Z
Current - Quiescent (Iq) 10μA
Current - Output High, Low 32mA 32mA
Output Polarity COMPLEMENTARY
Max Propagation Delay @ V, Max CL 4ns @ 5V, 50pF
Trigger Type Positive Edge
Input Capacitance 3pF
Propagation Delay (tpd) 26 ns
Height Seated (Max) 0.9mm
Length 2.3mm
Width 2mm
RoHS Status RoHS Compliant

TC7WZ74FK,LJ(CT Overview


It is embeded in 8-VFSOP (0.091, 2.30mm Width) case. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Push-Pull. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. A voltage of 1.65V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the TC7WZ series. Its output frequency should not exceed 200MHz. D latch consists of 1 elements. During its operation, it consumes 10μA quiescent energy. The number of terminations is 8. A voltage of 1.8V is used to power it. Input capacitance of this device is 3pF farads. The electronic device belongs to the LVC/LCX/Zfamily. The design is based on 1bits. Vsup reaches its maximum value at 5.5V.

TC7WZ74FK,LJ(CT Features


Tape & Reel (TR) package
TC7WZ series
1 Bits

TC7WZ74FK,LJ(CT Applications


There are a lot of Toshiba Semiconductor and Storage TC7WZ74FK,LJ(CT Flip Flops applications.

  • Frequency Dividers
  • Supports Live Insertion
  • ESD protection
  • Matched Rise and Fall
  • Digital electronics systems
  • Pattern generators
  • Dynamic threshold performance
  • Frequency Divider circuits
  • Automotive
  • Memory

Write a review

Note: HTML is not translated!
    Bad           Good