TCK105G,LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Supplier Device Package | 6-WCSPB (0.80x1.2) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 183mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 130 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 9 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50mOhm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TCK105G,LF Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in 6-UFBGA, WLCSP.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of P-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.For operation, 6 pins are used.Its maximum output voltage is 1.2AV.Maximum output current falls to 1.2A when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.There is 183mOhm resistance on the LED driver.As a result, the output current is set to 1.2A.The supply voltage should be set at 5.5V for best efficiency.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.
TCK105G,LF Features
Resistance of 183mOhm
TCK105G,LF Applications
There are a lot of Toshiba Semiconductor and Storage TCK105G,LF Power Switches ICs applications.
- PC Card Hot Swap
- Low Voltage I/O System Power
- Notebook PC
- Solid State Drivers
- USB Ports/Hubs
- Set-top-box
- Portable Music Players
- USB Power Distribution
- Notebook and Tablet Computers
- USB Protection
