TL1454ACN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 2MHz |
| Base Part Number | TL1454 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 4.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 30mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~20V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Buck, Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1454ACN Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 3.6V~20V. A -20°C~85°C TA dc switcher is not a problem. There is a switch at 50kHz~2MHz that can be used with this controller. dc dc regulator can be generalized using Through Hole. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. An array of 16 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 6V. Search for "TL1454" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 3.6V. The test statistics indicate that DC regulator outputs a voltage of 4.5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 30mA. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. A frequency of 2MHz is set for the switching controller. When running the voltage regulator dc to dc in a circuit, users should apply 20V to ensure safety and reliability.
TL1454ACN Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 2MHz
TL1454ACN Applications
There are a lot of Texas Instruments TL1454ACN DC to DC converter applications.
- Linear guide
- Servo drive system
- Nuclear power plants
- seismic instrument power circuits
- Various precision measuring instruments
- Automation technology
- Computer-related products
- Fire elevators
- PSRR circuits
- Radio equipment
