TL1454ACPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TL1454 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 40mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~20V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Buck, Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 2MHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1454ACPW Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 2 numbers. PMIC packaging is solid with a Tube enclosure. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 3.6V~20V. Qualified to work in an dc switcher with -20°C~85°C TA. This switching controller can switch at 50kHz~2MHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 6V. You can find other relevant dc to dc converter ics by searching "TL1454". There are a total of 16 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 3.6V. According to the test statistics, DC regulator outputs 20V voltage. The dc dc regulator's usual output current is 40mA, which should be noted down when you start a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 2MHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 20V.
TL1454ACPW Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL1454ACPW Applications
There are a lot of Texas Instruments TL1454ACPW DC to DC converter applications.
- Various precision measuring instruments
- Planers
- Smoke exhaust equipment
- Printing
- Energy management systems
- Adjustable voltage or current linear circuits
- Magnetohydrodynamic power
- Direct power supply system
- Remotely powered electric motors
- Drilling machines
