TL2844D-8
| Parameters | |
|---|---|
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2844 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
TL2844D-8 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). A 10V~30V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller can be switched at Up to 500kHz. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "TL2844". The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. Statistically, DC regulator outputs 30V volts. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 500kHz Hz. Input voltage can be set to 5.5V for nominal working status. A supply voltage of 15V is required. You should not supply more current than 30mA to the controller.
TL2844D-8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
TL2844D-8 Applications
There are a lot of Texas Instruments TL2844D-8 DC to DC converter applications.
- SMT equipment
- Medical equipment
- Printing equipment
- Precision electronic equipment
- Terrestrial set-top boxes
- Computer-related products
- Computer application technology
- Flaw detection equipment
- Access control systems
- Arc suppression circuits
