TL3845BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL3845 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3845BDR Overview
With a 14-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 7.6V~30V. Suitable for work in a 0°C~70°C TA dc switcher. Switching can be done at 100kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 14. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "TL3845". Switching converter has a total of 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. As determined by the test statistics, the output voltage of DC regulator is 30V. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 500kHz frequencies. You can set the input voltage to 5.5V for nominal working status. There is a requirement for a 15V supply voltage. The controller should not be supplied with more current than 30mA.
TL3845BDR Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
TL3845BDR Applications
There are a lot of Texas Instruments TL3845BDR DC to DC converter applications.
- Smoke exhaust equipment
- Low output voltage switching power supply circuits
- Nuclear power plants
- Energy management systems
- Alternators
- Motor controller circuits
- Flaw detection equipment
- Domestic water pumps
- Driver circuits
- ATMs
