TL494BDR2
| Parameters | |
|---|---|
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Max Frequency | 200kHz |
| Max Duty Cycle | 48 % |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | SWITCHMODE™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TL494 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
TL494BDR2 Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 7V~40V. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Other relevant dc to dc converter ics will be returned if you search "TL494". 16 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 7V. The dc to dc regulator can only accept a maximum input voltage of 40V. You should note down the dc dc regulator's usual output current of 500mA when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 48 % during power-up and power-down. It is estimated that this dc regulatorhas a maximum frequency of 200kHz. When running the voltage regulator dc to dc in a circuit, users should apply 15V to ensure safety and reliability. There are several dc to dc voltage regulator in the SWITCHMODE? series.
TL494BDR2 Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
TL494BDR2 Applications
There are a lot of ON Semiconductor TL494BDR2 DC to DC converter applications.
- Electrical distribution systems
- Arc suppression circuits
- CMM
- Shearing machines
- Photovoltaic power
- Die casting equipment
- Imported equipment
- Access control systems
- Ball screw pair
- Smoke prevention equipment
