TL594CDE4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Voltage |
| Input Voltage-Nom | 15V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 7V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 200mA |
| Frequency (Max) | 300kHz |
| Voltage - Output | 40V |
| Input Voltage (Min) | 7V |
| Topology | Flyback, Boost |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Supply Current-Max (Isup) | 18mA |
| Fall Time (Typ) | 45 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45 % |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TL594CDE4 Overview
It comes in the SOIC package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. It is capable of handling Voltage dc switching's outputs (s). There is a switch at 300kHz that can be used with this controller. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. 7V should be the minimum input voltage for the dc dc voltage regulator. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. Switching controller operates at 300kHz Hz. Temperatures should be kept at -40°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. The switch converters have 1 function (s) in total. We are designing chips that have 16 pins. Switching can take place at a maximum frequency of 300kHz. A 200mA input switching controller would benefit from it. normalworking processes output 40V voltage. It is important that the controller is supplied with 18mA more than 18mA volts of current. In terms of maximum supply voltage, switching voltage regulators is rated 40V.
TL594CDE4 Features
Voltage Outputs
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL594CDE4 Applications
There are a lot of Texas Instruments TL594CDE4 DC to DC converter applications.
- Emergency lighting monitoring equipment
- Surge protection circuits
- Various CNC machine tools
- Electric water heaters
- Shearing machines
- Handheld GPS
- Arc suppression circuits
- Television equipment
- ATMs
- Current source circuits
