TLC5916IDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1.5W |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916IDRG4 Overview
Space is saved using its 16-SOIC (0.154, 3.90mm Width) package. LED drivers are designed with 8 outputs.Surface Mount represents this mounting method.There is no doubt that this is a very efficient and reliable Linear.It is able to work normally at the operating temperature of -40°C~125°C TA.Signage provides many benefits.This system operates at 30MHz frequency.16 terminations are designed for its operation.To form its configuration, 16 pins are used.A total of 8 segments are estimated.LED drivers are found under the base part number TLC5916.It is acceptable to supply voltages of 5.5V volts.There is 20V voltage output from it.It consists of 16 pins.In addition, it can also be categorized into Display Drivers based on its characteristics.A minimal input voltage of 3V is required for it to operate.For highest efficiency, it works with a minimal supply voltage of 3V.5.5V is the maximum value of supply current that can be used.When the supply current should be less than 22mA, the device will provide high efficiency.The load is capable of receiving 120mA current.When operating at the maximum output current of 120mA, it is capable of providing all the benefits associated with LED drivers.
TLC5916IDRG4 Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5916IDRG4 Applications
There are a lot of Texas Instruments TLC5916IDRG4 LED Driver ICs applications.
- Stage Lighting and Signage
- Replacement lamps
- Industrial LED Lighting: Image Recognition Devices
- Sports Facility Lighting
- Other Electronic Devices
- LED headlights
- Down lighting
- Gallery lighting
- Linear fluorescent
- Refrigeration lighting
