TLC5924DAPRG4
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 5.318W |
| Nominal Supply Current | 65mA |
| Power Dissipation | 5.318W |
| Max Supply Current | 65mA |
| Current - Output | 80mA |
| Voltage - Output | 15V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 32 |
| Max Output Current | 80mA |
| Power Supplies | 3/5V |
TLC5924DAPRG4 Overview
In order to save board space, the HTSSOP EP package is used. This system operates at 30MHz frequency.32 terminations are designed for its operation.It has a base configuration of 32 pins.It is estimated that there are 16 segments.It's acceptable for the voltage to be 5.5V.This device has an output voltage of 15V volts.A device with 32 pins is available.Additionally, it is categorized into Display Drivers according to its characteristics.It operates at a voltage of 3V as its minimal input voltage.To meet high efficiency standards, it works with a voltage of 3V.There is 5.5V maximum value for supply current.In order to maintain maximum efficiency, the supply current cannot exceed 65mA.A stable operating temperature of 85°C is required.Maintaining a temperature above -40°C is essential for stabilizing operation.Even when operating at a maximal output current of 80mA, it is capable of delivering all the benefits of a LED driver.It comes with an interface chip marked LED DISPLAY DRIVER.Set the part output current to 80mA.
TLC5924DAPRG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 5V
TLC5924DAPRG4 Applications
There are a lot of Texas Instruments TLC5924DAPRG4 LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Medical surgery lighting
- High-end retail lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Industrial Equipment
- Gallery lighting
- LED Lightings for Inspection Devices
- Down lights
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
