TLC5924RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.482W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC5924 |
| Pin Count | 32 |
| Max Output Current | 80mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 3.482W |
| Output Current | 90mA |
| Max Supply Current | 65mA |
| Max Output Voltage | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Drivers | 16 |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5924RHBT Overview
32-VFQFN Exposed Pad package saves space on the board. The led light driver is mounted using Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.-40°C~85°C TA is the operating temperature for the led light driver.A number of benefits are available to Backlight.32 terminations are used in its operation.The LED light driver is configured with a base of 0 pins.Based on our estimates, there are 16 segments.Under the base part number TLC5924, you'll find this LED driver.As a maximum value, 5.5V is acceptable.32 pins are used on the device.Further, it can be classified as Display Drivers based on its characteristics.The minimum input voltage for this device is 3V.For highest efficiency, it works with a minimal supply voltage of 3V.The maximum value of supply current is 5.5V.This device is able to provide high efficiency when the maximal supply current should be less than 65mA.A load can be supplied with 90mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 30MHz.The maximum output current of 80mA allows it to deliver all benefits of a LED driver.It is recommended that the output voltage be no higher than 15V.
TLC5924RHBT Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5924RHBT Applications
There are a lot of Texas Instruments TLC5924RHBT LED Driver ICs applications.
- Down lighting
- Other Electronic Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- White LED Backlight for portable equipment
- Replacement lamps
- Scanners and Handy Terminals
