TLC5928DBQG4
| Parameters | |
|---|---|
| Package / Case | SSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 35MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.782W |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1.782W |
| Max Supply Current | 40μA |
| Current - Output | 35mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5928DBQG4 Overview
Its SSOP package is used to save board space. A frequency of 35MHz is used as the basis for operation.In this case, the terminations are set to 24.There are 24 pins used to form the base of its configuration.It is estimated that there are 16 segments.The supply voltage of 5.5V is an acceptable maximum value.The output voltage of the device is 17V.In addition, it has 24 pins.Additionally, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 3V is required for it to operate.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.In the case of supply current, there is a maximum value of 5.5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 40μA.Operating temperatures should not exceed 85°C in order to ensure stable operation.In order to maintain stable operation, a temperature greater than -40°C is essential.In this part, LED DISPLAY DRIVER refers to the interface IC.The part output current should be kept at 35mA.
TLC5928DBQG4 Features
Available in the SSOP package
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928DBQG4 Applications
There are a lot of Texas Instruments TLC5928DBQG4 LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- High-end retail lighting
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- Amusement Machines
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- Linear fluorescent
