TLC5928PWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.194W |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1.194W |
| Current - Output | 35mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5928PWG4 Overview
Space is saved using its TSSOP package. As a result, it operates based on the frequency of 35MHz.In this case, the terminations are set to 24.A configuration of this chip is made up of 24 pins.Segments counted are 16.It is acceptable to have a maximum voltage of 5.5V.It produces a voltage of 17V volts.On it, there are 24 pins.Additionally, it is categorized into Display Drivers according to its characteristics.Initially, it accepts a voltage of 3V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.When the maximum supply current is allowed, it reaches 5.5V.For stable operation, it is recommended that the operating temperature not exceed 85°C.In order to maintain stable operation, a temperature greater than -40°C is essential.LED DISPLAY DRIVER is the interface IC that the part is equipped with.Maintain the part's output current at 35mA.
TLC5928PWG4 Features
Available in the TSSOP package
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928PWG4 Applications
There are a lot of Texas Instruments TLC5928PWG4 LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
- Linear fluorescent
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Museum lighting
- Medical surgery lighting
- Panel lighting
- Amusement Machines
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
