TLC5928PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.611W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Base Part Number | TLC5928 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 3.611W |
| Output Current | 35mA |
| Max Supply Current | 2mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5928PWP Overview
Using its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, it is possible to save board space. LED drivers with this design have 16 outputs.This mounting method is Surface Mount.This emerges as a Linear with high efficiency and reliability.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.It operates based on the frequency of 35MHz.For its operation, terminations with a value of 0 are used.There are 24 pins on the base of this LED driver.The number of segments is estimated to be 16.It can be found under the part number TLC5928.5.5V is an acceptable voltage.It produces a voltage of 17V volts.In this device, there are 24 pins.In addition, its characteristics are classified into Display Drivers.A minimal input voltage of 3V is required for it to operate.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.The maximum supply current is 5.5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 2mA.It is possible to supply the load with 35mA current.
TLC5928PWP Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928PWP Applications
There are a lot of Texas Instruments TLC5928PWP LED Driver ICs applications.
- Stage and Studio lighting
- Medical surgery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Museum lighting
- Linear fluorescent
- LED headlights
- Replacement lamps
- Auxiliary lights for on-vehicle cameras
- General lighting
- Stage Lighting and Signage
